Treadmill Lower Motor Control Board Xterra TR6.6 110V B110S S10 (BP575) Treadmill Motor Controller for DYACO Johnson Treadmill Control Board(A002020007)

E01: communication failure, sensor failure; E02: you'd better test the motor first to check if there is any problem with motor, if motor work normal, then need to change controller. E03: Sensor fault; treadmill will run few seconds then show E03; E04: usually over-current fault, this situation is generally burned components on the controller; E08: May be lift motor control fault.

• Part number: A002020007; Description: B110D1-110V; Programming Number: 220808
• Please make sure that there is no problem with the motor before you place your order.The motor can be tested by the method shown in the picture below. If the motor running smoothly by 5# battery, that means the motor is good. If running not smoothly or do not running, it means the motor broken.
• If you don't know the model of the controller, please provide a photo of the old controller and send it to us for inspection.
• Durable Construction: Built with components for long-lasting performance and reliability.Easy Installation: Straightforward setup process, enabling a hassle-free integration into your home gym
• Customer Service: If you have any questions about the product, please contact us and we will reply within 12 hours. We are treadmill part direct sales，if you need other controller models, please contact our customer service