Oregon Lamination Heat Activated Laminating Pouches 12” x 18” x 3 mil (305mm x 457mm x 75 microns) [pk of 100] for ups to 11-3/4” x 17-3/4” Sheets, Large Menu Size, Matte Finish Both Sides

All laminating pouches are not the same. Oregon Lamination laminating supplies are designed and manufactured to specifications from people who do laminating for a living, to achieve high clarity with minimum defects. Oregon Lamination laminating pouches have not been setting on the shelf for years, so our fresh adhesive may melt faster than others, which means potential faster running times or lower temperatures used. Oregon Lamination matte finish laminating pouches add contrast which enhances black and white photos, dark images or ink on light color paper while reducing glare. Matte finish also provides a write-on surface for pencil or ballpoint pen. Oregon Lamination laminates come with a money back performance guarantee. SPECIFICATIONS:Compatible with all thermal pouch laminators capable of sealing 3 mil 12 x 18 inch lamination pouches (metric size: 305mm x 457mm x 75 micron x 2 flaps adds 150 microns thickness to your sheet). 3 mil is the thinner standard laminating pouch thickness available and seals in all pouch laminators capable of heat laminating 3 mil pouches for 6 mil total added to your sheet. Laminates have pre-rounded corners for a smooth professional finish. Matte finish both sides provides a low-glare surface for write-on signatures, notes, and scores with pencil or ballpoint pen.Note: Industry standard specification for 3 mil laminating pouches is 3 mil on each flap for a total of 6 mil added to your paper sheet card. 1 mil equals 1/1000th of an inch (metric: 25 microns). The industry calls these pouches; however, are sealed on only one edge instead of three (more like a file folder than a pouch, but with a 3/32” flat folded spine). TYPICAL APPLICATIONS:11 x 17, Ledger, Tabloid and Double Letter size sheets Signs Notices Menus Arts & CraftsTips:When trying any brand for the 1st time, consider running at a slightly lower temperature (or faster speed). If the results are cloudy, you can always run the sheet again at a higher temperature or slower speed, but you cannot fix heat blisters caused by running too hot or too slow. If planning on trimming laminated sheets, wait 24 to 72 hours for curing time for a professional cut edge.

• Pack of 100 thermal heat activated Laminating Pouches sealed on one 12” edge, includes 1 silicone coated laminating carrier for those laminators that require them
• 2 Durable 3 mil polyester plastic sides including heat activated adhesive which becomes clear when heat and even pressure is applied (laminator recommended) and includes standard 1/8" (3mm) radius rounded corners for a safe Professional Finish
• Matte finish both sides matte adds contrast which enhances black and white photos, images and dark ink on light color paper while dramatically reducing glare and provides a write-on surface for signatures, notes, and scores with pencil or ballpoint pen.
• Maximum insert sheet size recommended is up to 11-3/4” x 17-3/4” (299mm x 451mm) to provide a standard 1/8” (3mm) sealed edge border protecting your sheet
• Metric Pouch size: 305mm x 457mm and 75 microns x 2 sides = 150 microns total thickness added to your sheet