Huepar 3D Green Beam Self-Leveling Laser Level 3 x 360 Cross Line Laser Tool with 12 Feet Telescoping Pole -Two 360 Vertical and One 360 Horizontal Line -Magnetic Pivoting Base GF360G & LP36

Huepar GF360G 3D Laser Level 360 Self Leveling, Laser Class: Class 2 (IEC/EN60825-1/2014), less than 1mW power output

• 【Full Layout with 3 x 360 Line Laser】: One 360° horizontal and two 360° vertical planes enable users to cover the floor, wall, ceiling all around the room. Two vertical lines cross at 90° angles makes user quickly visualize and square the layout. With our smart pendulum system, this laser level tool self-levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle.
• 【Dual Power Methods & USB Charging Port】: Huepar GF360G Laser Level employed a large capacity of 3.7V / 5200mAh Li-ion Battery and provides long running time. The Li-ion Battery can be recharged in the battery charger (included in the package) separately as well as in the laser tool. When taking out the battery, the cross line laser level can be used at the job site by plugged in directly. The power indicator on the charger and keypad allow users to know the charging status.
• 【Brighter Green Laser & Outdoor Pulse Mode】: This self-leveling laser level adopted the bright Osram’s green laser unit, which is resistant to temperature changes and has higher stability. Under same light condition, the green beam is twice bright as the red laser with a working range up to 130 feet(100LUX) of accuracy within ±1/9 Inch at 33 Feet. The outdoor pulse mode helps extend the laser range up to 200ft with Huepar Line Laser Receiver LR-6RG/LR-5RG in bright-light or outdoor conditions.
• 【Arbitrarily Adjusted Telescopic Rod】Huepar LP36 Mounting Pole, an ideal telescopic rod for any worksite using tools that can be easily placed at any height between the floor and ceiling. Including four telescopic rods and one tail rod, Tail Rod Section with Arbitrary telescopic rod section can telescope out another 53cm/20.87". It has 3.7m/12.18ft when fully assembled with all sections and both end parts. The graduations are marked in black on the yellow pole in inches and centimeters.
• 【Multiple Installation Methods】: This green line laser offers 1/4"-20 and 5/8"-11 mounting threads for being fixed on tripod or mounting pole. Equipped with a magnetic pivoting base, the laser tool can be rotated to the required angle. The magnetic base also has 1/4"-20 & 5/8"-11 mounting threads to suit for different tripod threads. Strong magnets on the base allows for attachment to metal track and steel. In addition, the laser covers can be removed and replaced with a screwdriver.